All worksheets / Model Design and Building
Edition 2026Active Merit Badge
Model Design and Building
Official Requirements & Fillable Workbook · 2026 Edition
Model Design and Building is about turning blueprints and concepts into precise physical scale models. You will plan scale ratios, choose suitable materials, and practice safe cutting and gluing. Requirements 4 and 5 require constructing a detailed scale model — architectural, vehicle, or mechanical — plus an imaginative special-effects piece.
Key Requirements Covered:
- Scale Ratios & Blueprint Interpretation
- Model Materials: Wood, Plastics & Composites
- Precision Cutting, Assembly & Gluing
- Surface Finishing, Painting & Scale Detailing
6Printable Pages
6Requirements
2026Reqs Revised
What is on the worksheet: Model Design and Building Requirements
Every requirement for the Model Design and Building merit badge, word for word as published, with room to write under each one on the printed worksheet.
1Safety
Safety. Discuss all safety procedures with your counselor before beginning your modelmaking project, and explain why each is important—both in traditional and computer-assisted design and construction:
- a Explain the requirements for personal safety when using modelmaking hand tools, and when to use proper protective equipment.
- b Explain digital safety best practices when using computer design software, and digital fabrication tools.
- c Explain what precautions to take when using flammable or hazardous materials.
2Types of Models and Materials
Types of Models and Materials. Do the following:
- a Explain the uses for each of the following types of models: architectural, structural, process, mechanical, and industrial.
- b Explain to your counselor how either traditional and/or computer design tools can be used to create plans, simulate function, visualize models, and assist in constructing or fabricating parts.
- c Describe to your counselor traditional and modern materials and fabrication methods that can be used for making these models. Include physical and digital materials and methods.
3Planning Your Project
Planning Your Project. With your counselor's advice, select a subject from requirement 4 for your model project. (You must not use a pre-made kit; your project must be your original design.) Do the following:
- a Prepare the necessary plans to the proper scale.
- b Make a list of materials.
- c Create a list of the required tools.
- d This model should be your own original work. Tell why you selected this subject.
- e Discuss with your counselor if you plan to integrate computer design tools to complete your project.
4Build Your Model
Build Your Model. Do ONE of the following using physical and/or computer design methods. Before beginning any model, discuss your approach with your counselor, including the possible use of computer design software such as CAD or 3D modeling tools. Present your plans and completed model to your counselor.
- a Architectural Model. Design and build a model of a house to a scale of 1⁄4" = 1'0" (1:48 scale). Begin by creating floor plans and elevations. Include windows, doors, and structural elements. Discuss with your counselor the materials you intend to use, the amount of detail required, outside treatment (finish, shrubbery, walks, etc.), and color selections. You may choose to 3D print elements or use laser-cut parts based on using computer design. Present both your design and final model to your counselor for evaluation.
- b Structural Model. Construct a scale model showing corner construction of a wood-frame building to a scale of 1 1⁄2" = 1'0" (1:8 scale). Begin with a structural layout showing the parts of the floor and wall frames, such as intermediate girder, joist, bridging, subfloor, sill, sole plate, stud, and rafter. Use your plans to assist in building a physical model with cardboard, foam board, or wood. Review with your counselor the parts of the structure and discuss challenges in both your design and build process, gathering the materials and supporting the structure.
- c Process Model. Design and build a model showing the plumbing system of your house to a scale of 3⁄4" = 1'0" (1:16 scale) or an agreed upon scale. Show hot and cold-water supply, all waste returns, and venting. After creating your plan, talk to your counselor about how to begin this model, and present the scale and the materials you will use. Build the model using appropriate materials such as tubing, straws, or printed parts. After completion, present your model to your counselor, and be prepared to discuss any problems you had building this model.
- d Mechanical Model. Build a model of a mechanical device that incorporates at least two of the six simple machines. You can use digital tools to design and simulate the device before constructing it. Once your design is approved by your counselor, build a working physical model using materials such as wood, plastic, or 3D printed parts. Present your models to your counselor and be prepared to discuss materials used, the machine's function, and challenges you encountered during the construction process.
- e Industrial Model. Build a model of an actual passenger-carrying vehicle to a scale of 1" = 1'0" or 1⁄2" = 1'0" (1:12 or 1:24 scale). Begin by measuring a real vehicle and modeling it from multiple views (top, front, rear, sides). You can draw it or use computer design software. From your plans, build a physical model or use digital rendering or 3D printing to produce the final version. Discuss with your counselor which parts were most challenging.
5Special-Effects Fantasy Model
Special-Effects Fantasy Model. Design and build a fantasy spacecraft model suitable for a science-fiction film, using traditional modeling and/or computer design techniques. Determine an appropriate scale for your design—one that makes practical sense. Do the following:
- a Research real-world aircraft, submarines, and naval ships for design inspiration.
- b Design individual components (such as the cockpit, living areas, engines, and storage).
- c Produce a final sketch or a rendered image of the complete model from multiple angles.
- d Discuss your design process and scale choices with your counselor. Describe the materials (physical and/or digital) you used, how you engineered your model and discuss any difficulties you encountered and what you learned.
6Careers
Careers. Explore careers related to this merit badge. Research one career to learn about the training and education needed, costs, job prospects, salary, job duties, and career advancement. Your research methods may include—with your parent or guardian's permission—an internet or library search, an interview with a professional in the field, or a visit to a location where people in this career work. Discuss with your counselor both your findings and what about this profession might make it an interesting career.
Two dates, two different things
Requirements Revision vs. Worksheet Date
Scouting America last revised the Model Design and Building requirements in 2026. That is the badge, not this sheet — an older year does not mean the worksheet is out of date.
Verbatim Fidelity & Verification
This worksheet was checked against https://www.scouting.org/merit-badges/model-design-and-building/ in Aug 2026 and reproduces the requirements word for word. Both dates are printed on the sheet, so a copy in a binder can always be placed in time.
Requirement text is © Scouting America, reproduced verbatim. The worksheet layout and design are original to this project.
Nearby badges
Metalwork turns raw sheet, rod, and bar stock into durable tools and hardware. You will study work-hardening, annealing, and tempering, then choose one of four distinct disciplines: sheet metal, silversmithing, foundry, or blacksmithing. Each option requires heating, cutting, and shaping real metal into finished items.
Key Requirements Covered:
- Shop Safety & Metallurgy Fundamentals
- Metal Heating, Quenching & Annealing
- Forming: Forging, Casting, or Sheet Metal
- Finished Functional Metalworking Projects
Mining in Society covers the minerals, ores, and energy sources beneath our feet that make modern life possible. You will trace everyday products back to their mined raw materials, explore environmental reclamation, and learn about mine safety. Requirement 5 asks you to visit an operating mine, processing mill, or related geological site.
Key Requirements Covered:
- Mineral Exploration & Geologic Mapping
- Surface vs. Underground Mining Methods
- Mine Safety & Environmental Reclamation
- Mineral Processing & Everyday Uses
Motorboating combines mechanical knowledge with on-the-water boat control under Scouting America Safety Afloat. You must pass the BSA swimmer test before handling a boat. Requirement 5 is the practical driving test: leaving a dock, trimming the engine, maneuvering through a slalom course, and performing emergency man-overboard recoveries.
Key Requirements Covered:
- Boating Laws, PFDs & Registration
- Engine Systems, Fuel Safety & Inspection
- Navigation Rules of the Road & Docking
- High-Speed Handling & Emergency Recovery
Moviemaking is a collaborative storytelling badge where you write, shoot, and edit a real motion picture. You will draft a treatment, draw a detailed storyboard, and learn how camera angles, lighting, and sound establish mood. Requirement 3 requires producing a finished 3-to-5-minute film and screening it for your counselor.
Key Requirements Covered:
- Screenwriting & Storyboarding
- Camera Framing, Angles & Lighting
- Directing & Audio Field Recording
- Digital Video Editing & Film Distribution
